- 【Water Washable and Clean】 Water washable, you don’t have to buy alcohol to clean. Just rinsing directly with water after printing. This can save your money and time.
- 【High Precision and Quick Curing】This resin is the choice of many professional model enthusiasts as Great Precision and Quick Curing
- 【Suitable for Most LCD 14D Printers and Industries】The resin can be used stably on most printers. Such as: AC, Ele, Nov. It is prominent in dentistry, jewelry, model printing and etc.
- 【Quality materials and Lower Odor】We use high quality raw materials with low odor.
- 【Quality and After-sales Guarantee】Our resin is developed and produced by our own laboratory. The quality can be fully guaranteed. Any after-sales questions will be answered within 24 hours.
Low odor. Far less than the water washable from Elegoo. Reliable prints, great detail. Top notch product.
Anthony De La Garza
I used this on the recommendation by a friend to coat 3D prints, and WOW, this stuff works great. Easy to use, just wear a respirator, have a chip brush, wear gloves and you are on your way!
It doesn't stay white after long-term curing but good enough to paint.
Water whasable, no chemical smell, works perfect.
Water whasable, no chemical smell, works perfect.
I have both the transparent red and the transparent blue. Both of these resins work very well, are truly transparent when printed, and keep their form well (no warping that I saw). Recommended.
This product performed as advertised. I've read some reviews where people have had to make printer adjustments but for me I poured into my Anycubic MONO X and never looked back, worked flawlessly.
Not a whole lot to say here.It is resin for 3D printing, I use it in my Photon and Creality resin printersI normally buy the 500ml version, but this time I bought the big boyOnly difference I have noticed this time around is that it smells a little bit stronger than the 500ml bottle I had before it, still works beautiful for what I print.
Have had some nice prints but always seem miss a little bit not cleaned up all the way. Doing a final rinse in IPA seemed to help some. Still not the shiny clear as on the product page, but that could be our print quality of printer? Still happy with bright color and ease of use.
This resin works great. I have an Elegoo Mars 2 Pro, and it has worked amazingly with every print.
It's worth the price
Transparent resin sounds cool, until it yellows. If you don't mind that, or are planning on painting it anyways, go for it.
Excelente producto definitivamente lo me quedo con esta
great resin, very clear, slightly yellowish tint on larger objects because of prolonged heat/exposure. If glass-clarity is more important than speed to you, add some light off delay and increase lift distance + lower exposure time to 3-3.5stough, not brittlehard, little flexhigh detailfast curing (printed a small object at 3s per layer with 3mm lift & still heard a reliable pop on every layer)this is on a Malyan S200 Monochrome 4k printer
Excelente calidad de impresi��n
Excellent as what I expected to receive
made me feel like a man
Easy to clean and it just looks NICE
works like it should
Love this stuff. Works like a charm. Don��t put on pancakes!
Prints great a bit brittle but a 10% mix of flex resin realty makes a difference.
As of right now the price point can't be beat. I picked up 2kg of the transparent orange and other the user errors on my part it printed perfectly with normal exposure times. 55 seconds for my bottom layers and 8-8.5 seconds per layer after that and not a single problem. It's a little more flexible than some other resins available right now so I would recommend adding extra supports in some areas, but I couldn't be happier. And after a little primer the details just pop. Good stuff.
Amy J Reidel
This is my favorite resin. The smell is almost unnoticeable. Washes off with warm water fine. The only down side is you get 90% of the sharpness.
Easy to use like the product and cleaning is easy if you use all safety precautions
Really good stuff right here.
My favorite new resin! It is the miles ahead of elegoo resin
Needing no change to settings from standard photopolymer resin, I tested this product printing chess set and D&D mini's. I've noticed no loss in detail and the water washable property is nice so I don't have to deal with other odorous solvents. Only gripe about my particular bottle was the safety seal under the cap was pretty hard to cleanly remove as its paper based and was a little saturated causing it to tear.
When I get a new resin or filament I print out a standardized model and add it to my collection to create a swatch of sorts. I have both the clear orange, and clear purple Rick-OPTO which are circled in the photo, This resin came out great on my ld-002h using 2-sec layers, I am testing out a shorter exposer time and will update. But so far I am blown away with this product!!
Todo muy bien, llego r��pido
Very pleased with this resin product. The quality is great, very few print fails, and the bottle stretched forever! I would definitely buy again.
Had been using another brand and keep having failed prints but with this brand I have not had a bad print.
Overall it works well enough. I had a bit of a pain trying to dial in the settings, and I had to adjust the size of some minis (Anything that is a little on the thin end often turns out weak/floppy until fully cured). I had ordered the black resin, which has a slight translucency to it until cured fully as well, which may be why I had some odd curing.
This resin made extremely sharp and accurate features. Cure time was fast and clean up was super easy. It cured out to be a very good and workable part.
I've been using this resin in an Anycubic Photon and a Nova3D Elfin Mono 2 for about a week now. It took some time to dial in the correct settings for each machine, but that's not the fault of a new resin. Prints are crisp and details are sharp. "Water washable" is technically correct, insofar as IPA is going to work better than water no matter what, but dunking it in water first does get rid of some of the excess and make your IPA last longer. Now if only it didn't look like I had a cauldron of liquid flesh in my office...
Luz Adriana Miranda S��nchez
Ok so... I haven't been using this resin for long but I have been using it A LOT recently.PROS:-The price... is unbeatable.-Water washable: I've read a lot of comments here and forums about how the community does not trust water washable resins but you should trust this one. It's incredibly easy to rinse the excess of resin with no odor at all, no real harm to the skin (although I still wear gloves), no "fumes" watering your eyes... The fact that it is water washable makes the post processing part very easy.I use a container where I collect all the water and resin used to wash, put it to the sun, cure the leftovers and the I can use that water again. It's actually more eco friendly when "getting rid of the residues".-The texture: If you rub some cotton with denatured alcohol before post curing you can totally change the appereance of the surface... you can leave the plastic-like texture (kind of shinny) or give it a ceramic-like matte texture.-Virtually no odor while printing, no odor while washing... the only time I've noticed the smell is during the post-curing process and is still very low.-Works fine with rapid exposure time. I've tried with 2.5 seconds per layer and I'm currently trying with 1.5, I think it will work fine with less, even.GENERAL THINGS I LIKE but couldn't say if they are pros or cons:-The color: is not really white, but kind of Ivory-It does not look like, but it is flexible, a little. So you can use it to print parts that you need to apply some force to without breaking.-Easy to paint with acrylic paint. Like most resins, if you rub too hard on the paint or "scratch it" it will come off, but, it adheres good enough to the surface to get a good even layer paint on your model. We also covered one print with acrilyc spray and it looks amazing. No painting coming off and no damage was done to the resin. With acrylic paint we have seen no cracking, no flaking, no clumpling.CONS:-Not great detail. Although, I must say that maybe I'll find better settings with the printer to improve this point. I use a Creality LD-002H. The settings are in the images of the review. Like I said, this have worked for me so far, but I intend to improve the "detail part".-Careful with the post-curing time. If exposed for long or too close to the UV bulb, the resin will turn pink, a palid shade of pink, but pink nonetheless. I leave my prints no more than 30 minutes under the direct UV light when big and about 90 minutes per face when small, I have no idea why depending on the size there is so much difference in the times, but, it seems to work for me. Notice that I have to turn my prints manually under the light, i don't hace a turntable or a very complex post-curing station.-Shrinking is noticeable. I mean, it doesn't bother me really, but if I print something with a flat surface directly on the printers platform it won't stay flat. In order to achieve that "flatness" you must add a base and supports so that your model does not "contain" any 'bottom layers'.-Rich-ophto's site seems to be under construction now, so, asking them things directly is complicated, if not imposible (by the time this review was written). I had to figure out many thing about the resin myself, causing me to loose some of it in the testing. The bran is new, not many people using it, so there is no a lot of info on the internet about it yet. If you want to know about how this resin works, you will have to find out yourself.And... if I come across some new important detail, I'll upgrade the review.Some pics are of a dinosaur model I printed for a cake to make it look like a fossil. In order to do that I had to make sure the model was completely cured and washed... it worked fine. I didn't put it in the oven, I put the model just as decoration after the cake was baked. Loved how the ivory color make de "bone" look more realistic (maybe not as a fossil, but as a bone). The chocolate didn't stain the resin. And... well, now you have an idea of what to do for your next birthday with this great resin :)
This stuff works pretty good. First parts were great. Used in an LD-002H, 6layer15 sec base, .05mm layer, 1.25s exposure. The finish isnt great, but thats probably just my settings. Im definatley buying this on the regular.
This was my first ever purchase of water Washable resin and won't be my last. It is very similar in performance to other resins I've purchased except that I can wash with water instead of IPA. The color is a very pleasing light grey and pretty much odorless. I mean...If you stick your nose in the bottle, it stinks a little. But during printing, no odor could be detected at all. Additionally, this resin may yield parts that are a little less brittle than standard resin. One of the items I created and printed is a vehicle door pull escutcheon cover that needs a little flex to snap in place. The standard resin I was using would not allow enough flex without breaking. This resin seems to tolerate this flex just fine. Exposure times were about the same as standard AC grey resin I've been using. I limit my curing times to 1-2 minutes or less depending on size of printed part and this resin seems to like the abbreviated cure times. So far, I'm very happy with this resin and it will be my new go-to resin for simple models and parts.
Really good resin!! Great for miniatures and small models. Highly recommend it!
J. C. Silvia
Completely satisfied with this resin. It cleans up nicely with water. I find it works better than the Elegoo water-washable.The only possible drawback is that the black isn't as saturated as some. You can see this in the ear of the horse on the include picture. It is translucent because it is so thin. I assume this is a trade-off for exposure times which are a bit shorter than my other black resin. (pardon the dusty photo)Also, I should mention that have been impressed with Rich-OPTO's previous customer service.
Stellar quality. I bought this for printing up some models and I have to say it is a new preferred resin for my Elegoo mars. The blue wings and tail are another resin, elegoo clear blue, but same quality as it. Followed the instructions on the orange with 8 seconds per layer and 50 seconds for the bottom one and this dragon and the kobolds are the results. Now, to wait in line for a sip.
Needed more exposure that my standard profile but worked great once more exposure was added. Color was great, transparent orange was as advertised.
So far I've done two prints with this resin and they have come out fantastic. I had tons of troubles with Elegoos water washable grey, but this resin has given me 0 issues
Still best bang for the buck! I love the transparent resins and this blue is no exception.I love that it came with a funnel and a filter too!Nice price, really nice resin!!
Excellent quality, very accurate prints and nice color. No odor! Printed with Phrozen Sonic Mini with 0.050 setting.